JUSEN Concludes Online Launch of Its Black Whale Hinge

NEWS

Read this JUSEN article on home hardware innovation and applications.

JUSEN Concludes Online Launch of Its Black Whale Hinge

DATE:22th Oct 2022Author: JusenTags:Heijing hinge,new product online conference




The hinge is imported

From the day I met her

It's a big base, with a cold metal glow all over it.

This is contrary to Eastern aesthetics

More deviated from the warmth of home

So everyone wants to hide the hinge as much as possible

Jusen passed structural improvements

Changed the big four-hole base into an invisible base

Formed a slender figure

In order to minimize the cold light of metal

We put a coat on her

This coat is inspired by the fish-shaped streamlined design

Looks strong and graceful

Has characteristics consistent with whales

So we named her "Black Whale"

▼


On the evening of October 20th from 19:30 to 20:00, the 2022 Jusen Black Whale hinge new product online launch event came as scheduled. Mr. Luo Jiahui, Jusen Marketing Director, made a stunning appearance with the master of hinges. This time, the Black Whale Hinge, known as the "hinge hexagon warrior", not only redefined hinge aesthetics, but also broke through technical difficulties again, attracting the attention of the industry.


At the press conference, Mr. Luo shared Jusen's hinge development history, intelligent manufacturing system and quality management system with everyone, and then introduced the origin of the development of the one-word invisible base hinge. Finally, he solemnly revealed Jusen's new product - the Black Whale hinge.




Continuous innovation
Leading industry change


It has been twenty and one years since Jusen started from one hinge and has come to this day. During these thirty-seven years, Jusen has developed China's first new hydraulic hinge, and subsequently developed 45°, 60°, 90°, 165° and other hinge products. It is the inventor of more than half of the special-shaped hinges on the market.



In 2013, the light industry standard "QB/T 2189-2013" for concealed hinges co-edited by Jusen replaced the old national standard that had been in effect for 18 years and became the drafting unit of the new national standard.As the invisible promoter and enabler behind home furnishing manufacturing, Jusen established the first voluntary product testing center in the industry as early as 2008, and received the CNAS laboratory accreditation certificate issued by the National Accreditation Service in 2021.



Today, Jusen's products have covered various categories of home hardware: hinge series, slide rail series, OT series, functional hardware series, and smart hardware series, forming a complete product matrix of Jusen. In the past ten years, Jusen products have served more than 10 million families around the world. Jusen products can be seen in many buildings, apartments, five-star hotels and well-known buildings at home and abroad.







Intelligent manufacturing equipment
Strictly guarantee quality


As one of the few domestic companies with the ability to develop straight base hinges, Jusen has leading intelligent manufacturing equipment and advanced production technology. As early as 2015, the buffer production and testing process was 100% unmanned, and the automation coverage of the stamping workshop reached more than 90%. In the assembly workshop with complex processes, Jusen has achieved more than 75% automation coverage through in-depth self-research of assembly equipment, which is far ahead in the industry.



Jusen's self-developed J-VISION visual manufacturing management system covers the entire process of a product from the beginning to the end of assembly. More than 120 monitoring points are connected with J-VISION to realize flow monitoring, equipment early warning, abnormal positioning, downtime alarm, etc.



In addition, Jusen's "Eagle Eye Identification System" is an important magic weapon to widen the quality gap with its peers. Through deep learning algorithms and AI technology, the finished product status of each product is compared to match the quality of customers' personalized needs, achieving a factory pass rate of up to 99.99%.





New structural buffer
 Industry-disrupting performance


The structure of the Black Whale hinge invisible base comes from Jusen’s improvement of the buffer. The traditional buffer is large in size, which limits the hinge's ability to further reduce the volume of the base. The buffer is a mechanism that bears great stress in the hinge body. A smaller buffer means that each component in each buffer has to share a greater impact force.



At present, this is a technical challenge faced by the entire industry, but Jusen dares to break through the industry's technical ceiling. Through more durable materials, carefully selected imported silicone oil, and more reasonable fluid mechanics design, the performance of the new buffer exceeds the level of traditional buffers, thereby achieving a leap in hinge appearance.



In the rigorous European standard test, the Black Whale hinge also passed the EN15570 slam shut test. Its excellent performance also enables it to meet the challenges of taller and heavier door panels at the pinnacle of the industry.





Small angle buffer and two-stage force design
Bring the ultimate experience


Traditional hinges tend to vibrate when closing the door, but the Black Whale hinge uses a high-performance buffer to allow users to close the door softer and smoother. At the same time, the damping can be triggered by turning on a small angle of 5-15°, so there is no need to worry about the sound of the door being closed slightly after opening it, or the fact that children will pinch their fingers if they accidentally open the door.



Not only that, the new buffer structure also brings consumers a new two-stage force opening and closing experience. The two-stage force is designed to meet the needs of the door panel not to rebound and not lose the cabinet body. The elastic force automatically opens to a wider angle for easy access.






Extremely sophisticated design
Smaller door gap, stronger load capacity


The precise structural design brings consumers a smaller door gap experience. For full-cover cabinet doors, the minimum door gap between the Jusen Black Whale hinge door panel and the cabinet body is only 1mm, and the minimum distance between the door panel and the cabinet side is only 1.1mm. For half-cover cabinet doors, when the door panels are put together, the two door panels open at the same time, and the minimum door opening gap is only 2.2mm. The smaller door gap allows the cabinet to be closely connected to the wall and perfectly integrated.





Most of the straight base hinges currently on the market are fixed with two holes, and the door panels tend to sag. According to research, the main reason is that the screws are misaligned and do not fit the base hole, leaving a gap, which causes the door panel to sag over time. The Black Whale hinge pre-fixed screws can ensure that the screws are driven in vertically and fit perfectly with the base hole without leaving any gaps. It also reserves a third screw hole on the base, which further solves the problem of sagging door panels. According to rigorous testing by the Jusen CNAS laboratory, under a load of 20KG, the sinkage of the door panel connected by the two black whale hinges is only 4‰, which fully meets the national standards for hinge sinkage.



Screw pre-fixed
Integrated installation is more efficient

Difficulty in installation is a common problem with straight-line base hinges. Jusen has subversively transformed the original structure and innovatively launched a one-piece base hinge: that is, during installation, the base does not need to be separated from the hinge body. The hinge cup is fixed on the door panel. In the absence of markings or pre-embedded holes, the hole position is positioned through the top and side panels of the door panel. The hinge base and side panels can be fixed by drilling screws.



Not only that, compared with ordinary hinges, the Jusen Black Whale hinge also innovatively implements a screw pre-fixed structure on the base, which brings the positioning of the screws to the product production stage. The installer does not need to hold the screws, and can drive the screws vertically into the cabinet board at the predetermined position with one hand. What originally required two people to complete, can now be implemented by one person, which greatly improves the installation efficiency and reduces the risk of screw misalignment.



In addition, the Black Whale hinge also has a three-dimensional adjustment function. The height adjustment screw is realized in an eccentric manner. There is no need to lift the door panel for adjustment. Turning the screwdriver can make the door panel move up and down. The height adjustment is 3.8mm, the depth adjustment and the horizontal adjustment are 5mm each. The large adjustment amount significantly improves the product's installation fault tolerance. Jusen Black Whale hinge saves 30% of the installation time, and is a hinge with extremely high installation efficiency on the market.



How to remove the door panel after installation? The tail of the Black Whale hinge adopts an open slide-in design. The depth can be adjusted by gently turning the loose-tailed screw. If you want to remove the door panel, just loosen the tail screw widely and the door panel can be removed. Use the opposite steps to fix the door panel back.





Electroplated black nickel
Unique and beautiful shape

Jusen insists on ensuring the long-term anti-rust performance of the product through thicker coating requirements, more stringent quality control methods, and more comprehensive turnover protection; at the same time, the Black Whale hinge is electroplated with three layers of copper, nickel, and gun black. The minimum coating thickness is not less than 3 μm, and the 48-hour neutral salt spray level 8 test is long-term to ensure better quality.




The original intention of the Black Whale hinge design is to completely replace conventional hinges and guide the entire industry to upgrade. Therefore, when designing the specific parameters of this hinge, we strictly followed the common hinge varieties and parameters on the market.




The black fluid appearance design of the Black Whale hinge gun makes it a unique, beautiful product that complements the modern home design style. There is no screw in the whole body, making it stand out from ordinary hinges.




Every time we introduce something new, we put user experience first. As the drafting unit of national standards for furniture hardware, Jusen must not only be a promoter of high-quality development, but also allow users to enjoy quality home life with ease and effort.

As we all know, home hardware, as a traditional industry, has been facing challenges in recent years. Especially after the epidemic, rising raw material prices, shipping difficulties, real estate downturn, etc. have caused many companies to undergo a comprehensive test of transformation. The birth of Jusen Black Whale Hinge has undoubtedly brought confidence to the upgrading and development of the industry, and has become a successful example of breaking through against the trend in the industry.